【USE CGMINER】Gridseed Litecoin Miner 5.2MH Gridseed Blade G-Blade Asic Scrypt Miner Up to 6MH for Scrypt Mining

{UPDATE}

This blog had moved to our official site: WWW.EASTSHORE.XYZ 

Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-)

{Before Start}

Mining steps under Windows -- Miner hook up to Computer(Not Controler) 

Please download the software package needed: 

• Driver: https://drive.google.com/file/d/0B-_jcpU1s5dgdmtfX1FtUFk5Z0U/edit?usp=sharing
• Zadig: https://drive.google.com/file/d/0B-_jcpU1s5dgNDktV3FPVDE5VlE/edit?usp=sharing
• LTC mining software(modified cgminer): https://drive.google.com/file/d/0B-_jcpU1s5dgZnV4UW9sUk9QZlk/edit?usp=sharing 

{Miner Connection}

{MINING GUIDE}

• Set up the driver (For 32bit OS, please install x86 version; for 64bit OS, please install x64 version). 
• Power on the PSU of your miner. 
• Connect the two blades of the miner to your PC via the mini USB port on the blades. 
• If it shows up “setting up the driver”, please wait for it to finish. 
• Run the zadig 
• Choose "Options--->List all drivers", and then in the pull-down list 
• Choose “STM32 Virtual COM Port” and click “Replace driver”, like the following picture showing:
• Then close zadig, pull out the USB miners. 
• Insert the USB miners again. 
• pressing the windows key + the R key. So 'Windows + R'. This should give you a small window called 'run'.
• Enter 'compmgmt.msc' in the window, and hit the enter key. This should open a new window, called 'computer management'. 
• Check if there is a new Universal Serial Bus device. If there is no such device, please repeat steps above all.
• Open modified cgminer, and modify the .bat file(run.bat). 
• Double click all the .bat file, and mining will start.(like the following picture showing, just one blade) 

See also(thanks to the author): http://cryptomining-blog.com/1990-updated-cgminer-3-7-2-with-support-for-gridseed-5-chip-and-80-chip-gc3355-asics/